Information on aluminum 1050
1050 aluminum sheet belongs to the pure aluminum sheet series. The chemical composition and mechanical properties of 1060 aluminum are close to each other. The last two Arabic numerals of the 1050 series are 50, and according to the international grade naming principle, the aluminum content must reach 99.5% or more to be qualified products. China’s aluminum alloy technical standard (GB/T3880-2012) also clearly stipulates that the aluminum content of 1050 reaches 99.5%. Since it does not contain other metal elements, the production process is relatively single and the price is relatively cheap, so it is currently one of the most commonly used aluminum alloy numbers in the conventional industry. Industrial pure aluminum is characterized by a high plasticity, corrosion resistance, good electrical and thermal conductivity, but low strength and not strengthened by heat treatment. There are over hundreds of Aluminum sheet 1050 manufacturers in China.
1050 Aluminum Sheet/Plate Specifications
Aluminum Alloy: 1050
Alloy Designations: AA1050, A1050, 1050A, Al99.5
Anneal State: O, H12, H14, H16, H18, H24, H26, H19
Hardness: 20HB to 35HB
Standard: GB/T 3880-2012, ASTM B209,
Thickness Tolerance: +/- 0.02mm
Width Tolerance: +/- 2mm
Thickness: 0.30mm— 12.00mm
Width: 800mm— 2600mm
Length: 800mm— 11,000mm
Available in the aluminum strip, aluminum circle 1050, aluminum disc, Aluminum coil 1050
1050 Aluminum Sheet Chemistry Composition / A1050 Date Sheet:
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Al |
|---|---|---|---|---|---|---|---|---|---|---|
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | 0.03 | 99.5 |
1050 Aluminum Sheet Mechanical Properties / Properties of alloy 1050:
| Temper | Anti –tensile strength N/m㎡ | Elongation rate（%） | Dimension Control | surface |
|---|---|---|---|---|
| 1050-O | 78Mpa (8Ksi -12Ksi) | 35 (above 2.5 Ksi) | Qualified | Qualified |
| 1050-H12 | 95Mpa (11Ksi - 16Ksi) | 18 (above 9 Ksi) | Qualified | Qualified |
| 1050-H14 / H24 | 123Map (12Ksi - 17Ksi) | 7 (above 9 Ksi) | Qualified | Qualified |
| 1050-H18 | 140 Map (above 16Ksi) | 4 (above 10Ksi) | Qualified | Qualified |
Physical Properties of 1050A / Characteristics
Density: 2.71
Melting Point 640 degree,
Modulus of Elasticity 73Gpa,
Thermal Conductivity 121 – 193 W/M.k,
Thermal Expansion 21.1 x 10-6/K)
Conductivity Requirement: 61%
1050 H14 Aluminum Sheet/Plate advantage/Features
- Good formability, good weldability
- High plasticity, electrical and thermal conductivity
- low density: 2.71
- Can be gas welding, argon arc welding, spot welding
- Corrosion resistance
- Can be processed into aluminum plate 1050, aluminum strips 1050, aluminum coil 1050 H14, etc.
- Can not be strengthened by heat treatment
Application and Usage for 1050 Aluminum Sheet/Plate
1050 aluminum sheet and strip are often used in some occasions requiring high corrosion resistance and formability, but not high requirements for strength, chemical equipment is its typical use. For example, high-speed traffic signs, building facade signs, kitchen kitchenware, aluminum fan blades, etc. In addition, it is also used in lighting apparatus, Color coated aluminum, reflective plates, decorative items, chemical industry containers, heat sinks, lamps, nameplates, electrical appliances, stamping parts, and other products.
1050 Aluminum Sheet Price / 1050 Aluminum Sheet on sale
1050 H24 aluminum sheet does not contain other trace elements and is produced in a single process. 1050 aluminum alloy sheet is one of the most commonly used series in conventional industry and is the most sold aluminum sheet in the market. A1050 aluminum sheet is priced from 2.3$/KGS to 2.7$/KGS. 1050 aluminum sheet does not require very complicated processing techniques and therefore much cheaper compared to other aluminum alloys sheets.
How to keep 1050 aluminum from oxidizing?
Although 1050 aluminum has corrosion resistance, when the aluminum coil is put into the water or rain, the surface is very easy to oxidation phenomenon, resulting in surface spots, affecting the use of customers. Therefore, the storage environment is very important, here we give you the following advice:
- The storage environment of the aluminum sheet should be dry, bright, well ventilated, no corrosive climate.
- Aluminum coil 1050 should try to avoid the leakage of rain and snow.
- Strengthen the management of rolling oil, its water content control in 0.4% or less.
- Aluminum coil packaging should be sealed packaging, while each volume should be put into the appropriate amount of desiccant.
- When transported from low-temperature area to high temperature and high humidity area, do not open the 1050 aluminum coil sealed package immediately.
- The humidity of the wooden shaft and board of the packing box is not more than 18%, and the temperature of the packing color aluminum roll is not more than 45℃.
1050 vs 1060
These two grades are 1000 series aluminum sheets, but the aluminum content is different. 1050 aluminum sheet has 99.50% aluminum content, and 1060 aluminum sheet has 99.60% aluminum content. Relatively speaking, the higher the aluminum content, the softer the material. But the difference between the two is not much, both can not be heat-treated to strengthen. 1060 is suitable for making products such as stretching.
The aluminum content of the 1050 aluminum plate is more than 99.50%, and the aluminum content of the 1060 aluminum plate is more than 99.60%. At the same time, the 1050 aluminum plate does not contain copper, the 1060 aluminum plate contains 0.05 copper, but the 1050 aluminum plate does not contain. This is 1060 aluminum plate and 1050 aluminum plate alloy composition on some differences.
Aluminum 1050 vs 5052
Chemical Composition: 1050 aluminum plate aluminum content of about 99.50%, which is the most representative of the 1000 series aluminum plate a product introduction. While the 5052 aluminum plate is not the same (aluminum content of about 95%, the magnesium content of about 4%). 1050 is pure aluminum (aluminum content of 99.5%) 5052 than 1050 hardness, elongation, tensile strength, etc. are higher, the price is usually higher than 1050 250 $ / ton.
Mechanical Properties: 5052 aluminum sheet has excellent corrosion resistance, good weldability, and excellent formability making 5052 aluminum sheet a common choice for chemical, marine, or saltwater applications. 5052 aluminum plate applications include tanks, barrels, ship hardware, hulls, etc. Specific properties: Hardness = 60HB, tensile strength = 33,000, yield strength = 28,000. we will not do too much to introduce the 1050 aluminum plate, after all, the 1050 aluminum plate already belongs to the more commonly used series of products.
What is H14 alumium? H14 vs H24
There is a difference between 1050 H14 and 1050 H24, and the difference is significant. Aluminum plate H14 is a purely work-hardened state, suitable for the state where the required strength can be obtained without annealing and only by work-hardening; aluminum plate H24 is a state where work-hardening is followed by incomplete annealing. They have the same strength, but the elongation of aluminum plate H24 is higher.
The production process is different: H14 is intermediate annealed → cold rolled; H24 is cold rolled → partially annealed. The cold-rolled amount of H24 is larger than that of H14. Please refer to the standard GB/T/16475-2008.
Summary
1050 aluminum sheet is one of the most widely used aluminum sheet grades and it has good performance. When purchasing aluminum sheet from China, you must ask the manufacturer to issue a date sheet or mill test certificate of your 1050 aluminum sheet. High quality 1050 pure aluminum plate, the aluminum content of 99.5% or more, other materials to silicon, iron-based. In addition, the surface of the 1050 aluminum sheet should be flat, beautiful, without cracks, oxidation debris, heavy scratches, etc.
