DOING BUSINESS IN THE RIGHT WAY

+86 13583125052

Aluminum checker plate sheet supplier in Australia

HCALUMINUM can help you find the best aluminum sheet & aluminum coil & aluminum circle manufacturer in Australia

HCALUMINUM has established its aluminum sheet plate & aluminum coil subsidiary in Australia

HCALUMINUM has a good understanding of Australia’s Aluminum sheet & aluminum coil & Aluminum circle

HCALUMINUM introduces you to more Aluminum sheet & Aluminum tread plate & aluminum circle manufacturers in Australia

Benefits of Aluminum checker plate sheet

Several products used to be contenders for van flooring, and an aluminum checker plate sheet eventually became one of the most common. Why is it utilized for van flooring? What benefits does it have over all other products made of metal?

  1. Lightweight and energy saving

Alloy aluminum plates do have the benefits of low density as well as lightweight materials in contrast to standard steel plates.

For van flooring with the same requirements, an aluminum checker plate sheet is so much lighter compared to steel plates. It holds several advantages.

The drop in a van’s body weight will drastically decrease the fuel consumption of the entire vehicle, which implies the driver has an extra load of merchandise and more revenue.

  1. Long-lasting and corrosion resistant

Owing to the inclusion of various alloy parts, the aluminum checker plate sheet has a high resistance to corrosion.

The life span of the embossed aluminum sheet panels is about 10 times longer compared to conventional steel van flooring panels.

The former lasts just 3-5 years, whereas the latter run for decades, almost exceeding the full-service life of the van itself, until being worn out. This, too, is a huge benefit.

  1. Good anti-slip effect

The main difference between an aluminum checker plate sheet and the common aluminum sheets is that it has an elevated pattern that is stunning, elegant, and slip-resistant, most notably.

Rough van flooring surface greatly decreases the risk of collision during distribution between packages of commodities and preserves the goods’ value to the greatest extent. Five bar, as well as diamond aluminum checker plates, are the most commonly used van flooring aluminum sheets.

Aluminum checker plate sheet Supplier in Australia Review

Aluminium Warehouse


Address: Unit 2, 2 Wattle Rd, Brookvale, NSW 2100

Launched in the year 2009, Aluminium Warehouse has developed to become the largest warehouse of the aluminum geometric shapes, hence increasing basic range to comprise of many-colored aluminum angles, Damsteel toolboxes, Knotwood and many more.

The company is currently being managed by Stewart, together with Mark, Peter, and Jan, and they value customer service highly. The company aims to ensure that they stock products that are made in Australia to ensure they maintain a high standard as well as high quality.

This company is situated in Brookvale on the northern beaches of Sydney. The company does offer a wide variety of aluminum plates as well as sheets, tread, cut, and clear anodized.

Main Products:

  • aluminum sheet 1100,  
  • aluminum sheet 1050,
  • aluminum sheet 3003,    
  • aluminum sheet 5052,
  •  aluminum sheet 6061,  
  • aluminum sheet 7075,
  • aluminum sheet 5005,
  •  aluminum checker plate,
  • aluminum tread plate 1050 H14,
  • aluminum checkered plate 3003,
  • aluminum diamond plate,
  • aluminum checker plate 5 bars.

Ullrich Aluminium


Address: Melbourne, Australia

From the simple geometric shapes to the high-end structural aluminum sections which utilize aluminum, which does have high purity.

Ulrich Aluminum does offer access to a wide range of experts of aluminum extrusion as well as rolled products as well as they have their team of highly experienced design engineers who can aid in creating your extrusion for any task. The company was founded in 1961 by William Ulrich.

Main Products:

  • aluminum sheet 1100,
  • aluminum sheet 1050,
  • aluminum sheet 3003,
  • aluminum sheet 5052,
  • aluminum sheet 6061,
  • aluminum sheet 7075,
  • aluminum sheet 5005
  • aluminum checker plate,
  • aluminum floor plate 1050 H14,
  • aluminum checkered plate 3003 H14,
  • aluminum diamond plate,
  • aluminum checker plate 5 bars.

CALM ALUMINIUM


Address: 28 Saggart Field Rd, Minto NSW 2566, Australia

Calm Aluminum does specialize in sourcing as well as the supply of aluminum for structural applications. The company offers a wide range of products for various industries such as Defence, automotive, aerospace as well as general engineering, etc.

The company is able to stock a wide range of aluminum, but with the local as well as international contacts which they have access to; ranging from copper, stainless steel, titanium, brass as well as other specialty metals on request.

The company is able to work with a wide range of companies which does have a wide range of capabilities. Calm Aluminum was established in the year 2002 and offered products and services to sectors in New Zealand and Australia.

Main Products:

  • aluminum sheet 1100,
  •  aluminum sheet 1050,
  • aluminum sheet 3003,  
  • aluminum sheet 5052,
  • aluminum sheet 6061,
  • aluminum sheet 7075,
  • aluminum sheet 5005,                                     
  • aluminum checker plate,
  • aluminum tread plate 4×8,
  • aluminum checkered plate 3003 H14,
  • aluminum diamond plate,
  • 5 bar aluminum tread plate.

Kingseng Aluminium Australia


Address: 42 Brindley Street, Dandenong South VIC 3175, Australia

Kingseng Aluminium Australia was established in the year 2005, and it has expanded to be able to grow as a customer-centered company. It does have two branches that do service VICTORIA areas.

This company has ensured that the process of buying aluminum is simple and very convenient. Their key focus is on customer needs. Their loyal customers enjoy customer service from their experts with many years of aluminum experience as well as an extensive range of commodities.

Kingseng Aluminium enjoys massive support from their international extruders as well as sheet suppliers who, together with their team, have been made to order aluminum products and the technical data.

Main Products:

  • aluminum sheet 1100,
  • aluminum sheet 1050,
  • aluminum sheet 3003,
  • aluminum sheet 5052,
  • aluminum sheet 6061,
  • aluminum sheet 7075,  
  • aluminum sheet 5005,
  • aluminum checker plate,
  • aluminum tread plate 1050 H14,
  • 3003 h22 aluminum tread plate,                                   
  • polished aluminum tread plate  6061,
  • aluminum tread plate.

Alsun Aluminium


Address: Sunshine Coast and Brisbane Regions. Australia

Alsun Aluminium was started in the year 2000. It does operate two divisions, which operate at the Brisbane Metropolitan and Sunshine Coast areas.

This is a family-owned business, and it has experienced growth over the years. They have highly experienced staff which ensure that works get to be implemented in the right way. Apart from aluminum checker plate sheets, they offer a wide range of services, ranging from on-site cutting facilities, finishing and semi-fabrication facilities.

Alsun Aluminum offers to cut for Sheet and Extrusion. Some of the machines which they have on-site include Band Saw, Mitre Saw, and Guillotine, and they are able to provide a very quick turnaround of the requirements.

Main Products:

  • aluminum sheet 1100,
  • aluminum sheet 1050,
  • aluminum sheet 3003,
  • aluminum sheet 5052,  
  • aluminum sheet 6061,
  • aluminum sheet 7075,
  • aluminum sheet 5005,                                   
  •  aluminum checker plate,
  • polished aluminum diamond plate,
  • aluminum checkered plate 3003 H14,
  • aluminum diamond plate,
  • aluminum checker plate 5 bars.

Earlybird Steel


Address: 31 Trade Street, Lytton, QLD 4178

Earlybird Steel does have a wide range of steel that is suitable for all the building requirements. This ranges from home handyman through to the structural steel for the residential building projects.

Also, with over 30 years of experience in the sector, their staff can be able to provide expert advice as well as guidance to be able to help one to make the right choice. They provide an aluminum checker plate sheet of different measurements.

Main Products:

  • aluminum checker plate for caravans,
  • aluminum sheet 1050,
  • aluminum sheet 3003,
  • aluminum sheet for trailers,
  • aluminum sheet 6061,
  • aluminum sheet 7075,
  • aluminum sheet 5005,
  • aluminum checker plate,
  • aluminum tread plate 1050 H14,
  • aluminum checkered plate 3003 H14,
  • aluminum diamond plate,
  • aluminum checker plate 5 bars.

Austral Wright Metals


Address: PO Box 6105 Wetherill Park 2164

This is a leading metals supplier in Australia for over 20 years.  The company provides a wide range of stock, and they have highly qualified staff with vast experience. Austral Wright Metals is determined to provide exactly what the client requires.

The company is able to provide over 5000 products of bronze, copper, brass: aluminum and stainless steel, nickel alloy as well as titanium.

The company is well equipped to be able to ensure it meets all the client’s requirements. This firm supplies a combination of the best products as well as the price to ensure that your business remains highly competitive.

Main Products:

  • anti-slip aluminum checkered plate,
  • aluminum sheet 1050,
  • aluminum sheet 3003,
  • aluminum sheet 5052,
  • aluminum sheet 6061,
  • aluminum sheet 7075,
  • aluminum sheet 5005,
  • aluminum checker plate,
  • aluminum tread plate 1050 H14,
  • aluminum checkered plate 3003 H14,
  • aluminum diamond plate,
  • aluminum checker plate 5 bars.

.Aluminium Trade Centre


Address: Unit 4 / 556 Princes Highway, Noble Park North VIC 3174

Aluminium Trade Centre supplies Aluminum extrusions, sheets as well as related commodities to Melbourne. Their prices are quite affordable, and they do accept small or large orders.

The company is open to members of the public and trade customers; one can order via their website, and they will deliver to the home or even the worksite.

The company proudly supplies the largest range of retail as well as wholesale aluminum products directly online as well as in-store. They can be able to customize every item, cutting it to the preferred length or even the size.

Main Products:

  • aluminum sheet 1100,
  • aluminum sheet 1050,
  • aluminum sheet 3003,
  • aluminum sheet 5052,
  • aluminum sheet 6061,
  • aluminum sheet 7075,
  • aluminum sheet 5005
  • aluminum checker plate,
  • aluminum tread plate 1050 H14,
  • aluminum checkered plate 3003 H14,
  • aluminum diamond plate, 
  • aluminum checker plate 5 bars.

Just Steel Product


Address: 1 Kibble Place, Narellan, NSW 2567

Just Steel Product was started in the year 2012 to offer the best quality products in the market. Their range of products are superb for small or even large project, and they have a highly qualified team.

J Steel does have a long and very successful past offering engineering as well as procurement strategies to the construction sector in New Zealand, Australia as well as across South Pacific.

The company clearly understands construction, procurement as well as construction management in its mission. They have a reputation for high quality as well as cost-efficient products.

Main Products:

  • aluminum sheet 1100,
  • aluminum sheet 1050,
  • aluminum sheet 3003,
  • aluminum sheet 5052,
  • aluminum sheet 6061,
  • aluminum sheet 7075,
  • aluminum sheet 5005,
  • aluminum checker plate,
  • aluminum tread plate 1050 H14,
  • aluminum checkered plate 3003 H14,
  • aluminum diamond plate,
  • aluminum checker plate 5 bars.

Action Aluminium


Address: 78 Greens Road, Dandenong, VIC, 3175

Action Aluminium has been known for excellence in the supply of aluminum products. This company was founded in the year 2005, and the company does have advanced sales division which cares about their customers.

The company has its head office situated in Dandenong Victoria, and the firm is 100% family-owned. It does operate as a retailer as well as a wholesaler of aluminum rolled as well as the extruded commodities. The firm has employees with high expertise, which ensures they offer excellent services.

Main Products:

  • aluminum sheet ribbed,
  • aluminum sheet 1050,
  • aluminum sheet 3003,
  • aluminum sheet 5052,
  • aluminum sheet 6061,
  • aluminum sheet 7075,
  • aluminum sheet 5005                                    
  •  aluminum checker plate,
  • aluminum tread plate 1050 H14,
  • aluminum checkered plate 3003 H14,
  • aluminum diamond plate,
  • aluminum checker plate 5 bars.

Recommendations


  1. Ullrich Aluminium

Ullrich Aluminium is a global leader that constantly develops the technology, metallurgy, quality, and finishing of aluminum to revitalize this industry. It manufactures a wide variety of aluminum items for applications in the marine, automotive, commercial, domestic as well as design sectors. Many of their staff, including key personnel, have always been in the organization for over 20 years. That amount of expertise you will not find anywhere. Their cumulative expertise ensures good service as well as knowledge of the commodity. That can be attested to by their sizable client base.


  1. Austral Wright Metals

AWM is proud to have been running an accredited framework of quality control for more than 20 years. To conform with the criteria of ISO 9001:2015, the company have recently upgraded their accreditation. For the warehousing, procurement, and distribution of non-ferrous semi-wrought as well as ferrous items.

Conclusion

In shipbuilding, decorative and architectural applications, the aluminum checker plate is commonly used. Aluminum Diamond Plate is simple to produce with good shaping, drilling as well as welding capacity, and its elevated diamond lug design offers valuable resistance to slip.

There are different uses for the aluminum checker plate. They are used in automobiles, ships, plants to manufacture various products as well as Architecture.

The best items would have a limited value. For the aluminum checker plate sheet, the same applies. However, the recycling valuation of the aluminum checker plate scrap is much higher compared with the standard steel plates, and the recycling level will hit 80 percent. The aluminum sheet is extremely environmentally sustainable, according to the international strategy for sustainable resource production.