What you need to know about 3003 H14 alumiunm alloy sheet?

About aluminum sheet 3003 H14

3003 aluminum sheet belongs to 3xxx series aluminum sheet, which is a typical Al-Mn alloy. It is slightly stronger than pure aluminum and cannot be strengthened by heat treatment. 3003 grade can also be produced into aluminum coils 3003, aluminum tread plate, color coated aluminum sheets, etc. 3003-grade aluminum is one of the most widely used alloy grades.

 

3003 H14 Aluminum Sheet Specifications

〈Aluminum Grade〉3003

〈Temper〉O, H12, H14, H16, H18, H22, H24, H26

〈Name〉3000 Series aluminum sheet, aluminum alloy sheet, Anti-rust aluminum alloy sheet

〈Form〉Aluminum Plain sheet, 3003 Aluminum coil, Aluminum 3003-h14 perforated sheet

〈Surface treatment〉Aluminum bare sheet, mill finish, mirror finish, aluminum tread plate

〈Thickness〉0.10-100mm

〈Width〉20-2600mm

〈Length〉50-11,000mm

〈Protection〉Aluminum sheet with PVC films or paper-interleaved

 

Aluminum 3003 H14 Date sheet:

3003 H14 Aluminum Sheet Properties:

Yield Strength: 145 Mpa

Ultimate Strength: 150Mpa

Hardness: 40HB

Machinability: Good

3003 aluminum density: 2.73

3003 aluminum bending: Good

3003 aluminum welding: Good

 

Typical Application – 3003 Aluminum Uses

3003 aluminum sheet has good formability, weldability, and corrosion resistance. Commonly used in the processing of parts that require good forming properties, high corrosion resistance, and good weldability. For example.

 

Cookware 

Pressure vessels 

Sun visors 

Natural gas piping 

Pipeline sheathing

Garage doors 

Refrigerator panels

Kitchen appliances

Truck/trailer roofs

Heat Exchangers

Non-slip aluminum panels

3003 aluminum thermal conductivity

 

Can you bend 3003 aluminum?

3003 aluminum sheet has good ductility and will not crack when bent. For example, the most used temper of 3003 aluminum sheet in the bending field is H24 and H14 state. The state of the 3003 aluminum plate is divided into hard, half-hard, soft. The hard 3003 aluminum plate bending effect is basically not very good (aluminum plate state is H18, H19, H38, etc. are all hard). Half-hard state of aluminum plate basically can be bent (H14, H24 is also half-hard temper) O state of bending is certainly no problem, but because it is too soft, nearly no people use 3003-O aluminum bending.

3003 Aluminum Sheet Price

3003 aluminum sheet is the lowest price rust-proof aluminum alloy aluminum sheet product for the outdoor environment. 3003 aluminum sheet price varies according to thickness, length, width, and different states. Let’s discuss thickness between 1-100mm, width 100-1500mm, and length 200-2500mm. The standard sizes of 3003 aluminum sheets are 1220*2440mm, 1250*2500mm, and 1500*3000mm.

 

1. Thickness from 0.3mm to 6.0mm are CC quality aluminum sheet. The price is FOB Qingdao: 2450USD/MT;
2. Thickness from 6.0mm to 100mm is DC quality aluminum sheet. The price is FOB Qingdao: 2630USD/MT;

 

3003-H14 vs 5052-H32.

Both 5052 aluminum sheet and 3003 aluminum sheet are the most common alloy aluminum sheets on the market and are the two most representative grades of the two series aluminum sheets. Both grades can be bent. What is the difference between the 5052 aluminum plate and the 3003 aluminum plate?

 

Chemical composition. 3003 aluminum belongs to aluminum-manganese alloy, the main alloy element is manganese. 5052 aluminum belongs to aluminum-magnesium alloy, the main alloy element is magnesium. In addition, the aluminum content of 3003 is slightly higher than the 5052 aluminum plate.

Specifications. The 3003 aluminum in the market is a mainly thin sheet, and the application of thick plate is basically less. While 5052 aluminum sheets not only used in a thin sheet, the use of a thick plate is also very large.

Price. Depending on the thickness and specifications, the price of the 5052 aluminum sheet is about 300 USD higher than the 3003 aluminum sheet under the same circumstances.

 

What is the difference between 3003 and 5052 aluminum?

 

1100 vs 3003 Aluminum

Hardness difference: 3003 aluminum plate belongs to alloy aluminum plate, 1100 aluminum plate belongs to the pure aluminum plate. So 3003 aluminum plate is higher than 1100 aluminum plate in hardness.

Aluminum content difference: we know that the greater the proportion of aluminum content, the aluminum plate will be relatively soft. The aluminum content of the 1100 aluminum plate is 99%, while the aluminum content of the 3003 aluminum plate is generally around 96%.

Performance difference: 1100 aluminum sheet, high aluminum content, suitable for stamping performance, extension performance and casting and rolling, etc. 3003 aluminum plate because of its excellent rust resistance, stable quality, so 3003 aluminum plate hardness is better, also suitable for equipment shell products.

 

What is the difference between 1100 and 3003 aluminum?

3003 aluminum vs 3004

3003 aluminum sheet and 3003 aluminum bar are used for processing parts that require good formability, high corrosion resistance, or good weldability. They are also used for parts that require both these properties and higher strength than 1x×× alloys, such as pressure tanks for transporting liquid products, heat exchangers, chemical equipment, fuel tanks, kitchen equipment, etc.

 

3004 aluminum sheet is often used to process all aluminum can bodies, requiring parts with higher strength than 3003 alloys. Chemical production and storage devices, sheet processing parts, cable ducts, various lamp parts, etc.

 

What is the difference between 3003 aluminum and 3004 aluminum?

 

Aluminum 3003 vs 1050

The hardness of the 3003 aluminum plate is higher than the 1050 aluminum plate, the hardness of the 3003 aluminum plate is 30-35HB, but the 1050 aluminum plate contains more than 99.50% aluminum, so the 1050 aluminum plate is softer than the 3003 aluminum plate, the difference is about 10%. 3003 aluminum plate is suitable for building facades, car linings, bus low linings, product outsourcing, etc. 1050 aluminum plate is more often used in insulation pipes, ceiling tiles, ceiling, and lighting stamping, etc. Because it is softer.

 

What is the difference between aluminum 3003 and 1050 aluminum?

 

Aluminum 3105 vs 3003

3105 aluminum sheet has good rust resistance, good electrical conductivity, electrical conductivity up to 41%, 3105 aluminum sheet has good corrosion resistance and good weldability. Application areas: room partitions, the aluminum substrate for color coating, lamp head material, shutters, bottle caps, corks, etc.

3003 aluminum sheet is a typical Al-Mn alloy with good formability, corrosion resistance, and weldability. 3003 aluminum sheet is commonly used for making power battery shells in lightweight cars, cookware, food storage devices, tanks, pressure vessels, and pipes on transportation equipment.

 

What is the difference between aluminum 3105 and 3003 aluminum?

 

Summary

3003 aluminum sheet performance advantages: 1. Low plasticity, good corrosion resistance 2. Formability, dissolution, corrosion resistance are good 3. Good weldability. Now the 3003 aluminum sheet in the market are cold rolled mainly, the price is low, can be used in the outer packaging, mechanical parts, refrigerators, air conditioning ventilation ducts, and another wet environment, the product has good rust resistance.